1000	Welcome to the InControl Tools 95 Monitor Wizard.
1001	 
1002	You have arrived at the Monitor wizard because
1003	your Monitor is not among those listed in the
1004	'Change Display Type' dialog.
1005	 
1006	We will assist you in determining the capabilities
1007	of your monitor. Your monitor owner's manual will
1008	be useful during this process. However, if you don't
1009	have it don't worry. We will just work a little harder
1010	for you.
1011	 
1012	If you are ready to begin click Next.
1013	 
1040	In order to determine your monitor's capabilities we are
1041	going to apply various operating settings to your monitor.
1042	Each setting will cause your screen to flicker momentarily
1043	after which we will reapply your original monitor settings.
1044	 
1045	If you have never been through this process we 
1046	recommend the 'Minimal' or 'Typical' monitor setup, 
1047	otherwise choose 'Custom'.
1048	 
1050	    Determines which modes your monitor
1051	    supports at a refresh rate of 60 Hz.
1053	    Determines which modes your monitor
1054	    supports at the highest refresh rate.
1056	    Allows you to select your own mode
1057	    and refresh rate combination.
1080	The wizard will start testing the monitor when you are
1081	ready. You will see the screen flicker momentarily for 
1082	each setting. The wizard will ask you if the screen looks
1083	normal and stable. If the screen doesn't look normal just
1084	wait a few seconds and a new setting will be attempted.
1085	 
1086	 
1120	The wizard will test your monitor when you are ready. The
1121	screen may flicker momentarily for each setting. The Wizard 
1122	will ask you if the screen looks normal. If it doesn't look
1123	normal wait a moment and a new setting will be attempted.
1124	 
1125	This test may take 6 or 7 minutes to complete.
1126	 
1160	You may select the modes to be tested( either one at a 
1161	time or several at once). After you have made your selection
1162	just press the 'Begin Testing' button. The modes which
1163	are valid for your monitor will be marked with '>>' .
1164	 
1165	 
1166	 
1320	The modes which your monitor can do have been collected.
1321	If you are satisfied with the test process and would like
1322	to save the results click 'Finish'. 
1323	 
1324	If you would like to go back and perform the test again
1325	you may do so now.
1326	 
1327	 
1328	 
61440	Open
61441	Save As
61442	All Files (*.*)
61443	Untitled
61696	Invalid filename.
61697	Failed to open document.
61698	Failed to save document.
61699	Save changes to %1?
61700	Failed to create empty document.
61701	The file is too large to open.
61702	Could not start print job.
61703	Failed to launch help.
61704	Internal application error.
61705	Command failed.
61706	Insufficient memory to perform operation.
61712	Please enter an integer.
61713	Please enter a number.
61714	Please enter an integer between %1 and %2.
61715	Please enter a number between %1 and %2.
61716	Please enter no more than %1 characters.
61717	Please select a button.
61718	Please enter an integer between 0 and 255.
61719	Please enter a positive integer.
61728	Unexpected file format.
61729	%1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730	Destination disk drive is full.
61731	Unable to read from %1, it is opened by someone else.
61732	Unable to write to %1, it is read-only or opened by someone else.
61733	An unexpected error occurred while reading %1.
61734	An unexpected error occurred while writing %1.
61836	Unable to read write-only property.
61837	Unable to write read-only property.
61840	Unable to load mail system support.
61841	Mail system DLL is invalid.
61842	Send Mail failed to send message.
61984	OK\n50
61985	Cancel\n50
61986	&Apply\n50
61987	&Help\n50
61988	Close